Mini Neon Flex™ Connector Pin

Neon Flex Front connection pins. Male 2 pin smooth to Male 2 pin barbed, used at the beginning of an LED strip, when connecting between Power Supply and LED Neon. The barbed end is pushed into the Neon Flex, smooth pins connect to the power cable.
Mini Neon Flex™ End Caps

For sealing ends of the Neon Flex, securing and preventing water ingress.

Neon Flex™ Heatshrink Tubing

Heat Shrink to be used to seal the connectors and End Caps after these have been fitted to the Neon Flex using the Glue above.
Neon Flex™ Glue

The Glue is used inside the End Caps and Power Lead Cap to seal and bond them to the Neon Flex.

Mini Neon Flex™ Power Cable

Mains 230VAC power supply which is capable of powering up to 50 meters of LED Neon Flex. Comes supplied with output cable with a molded front end connector for Mini Neon Flex.
Mini Neon Flex™ - 240V Accessories

These accessories available are purchased seperately and do not come as an accessory kit.
Mini Neon Flex End Caps
Mini Neon Flex End Caps
Mini Neon Flex Connector Pins
Mini Neon Flex Connector Pins
Heatshrink Tubing
Heatshrink Tubing
Glue
Glue
Mini Neon Flex Power Cable
Mini Neon Flex Power Cable
Additional Mini Neon Flex™ Accessories
50mm Mini Neon Flex Channel
50mm Mini Neon Flex Channel
Mini Neon Flex™ 50mm Aluminium Mounting Channel

Part Num: SNFX3528_CLIPS

A 50mm aluminium channel clip with two mounting holes and comes supplied with 2 x cross head screws.
© 2014 - 2017 Neon Flex     |     All rights reserved                                                                                                                        www.neonflex.co.uk