RGB Neon Flex™ 4 Way Connector Pin

Neon Flex Front connection pins. Male 4 pin smooth to Male 4 pin barbed, used at the beginning of an LED strip, when connecting between Power Supply and LED Neon. The barbed end is pushed into the Neon Flex, smooth pins connect to the power cable.

RGB Neon Flex™ 1M Aluminium Mounting Channel

Part Num: LN-FCB-4W-CH-1M

Neon Flex Aluminium mounting channel for RGB and 3528 Neon Flex in 1M lengths, can be cut down to desired lengths.
 
RGB Neon Flex™ End Cap

For sealing ends of the Neon Flex, securing and preventing water ingress.

Neon Flex™ Heatshrink Tubing

Heat Shrink to be used to seal the connectors and End Caps after these have been fitted to the Neon Flex using the Glue above.
Neon Flex™ Glue

The Glue is used inside the End Caps and Power Lead Cap to seal and bond them to the Neon Flex.

1.5m Cable with Moulded End Cap

1.5m long cable with moulded end caps, 1 end to suit the controller (SRC-181) and the other end to suit the RGB Neon Flex.
RGB Neon Flex™ - 240V and 24V Accessory Kits
Part Num: ACCS_LEAD_SET_RGB_NEONFLEX

These accessory kits can be used for both 240V or 24V RGB Neon Flex

They contain: 1 x cable 1.5m long with moulded end caps, 1 x 4 way connection pin, 1 x end cap, 2 x heatshrink & 1 x bottle of glue.


1 x RGB End Cap
1 x RGB End Cap
1 x 4 Way Connection Pin
1 x 4 Way Connection Pin
2 x Heatshrink
2 x Heatshrink
Glue
Glue
1.5m Cable with Moulded End Cap
1.5m Cable with Moulded End Cap
24V Power Supply
24V Power Supply
24V Power Supply

Part Num: SDL-109P-240-24V-SP

24VDC Power Supply Unit (320Watt) for above controller. Comes configured with one output but can be expanded to provide 4 Outputs. For use with 24volt DC lighting products

24V RGB Neon Flex Controller
24V RGB Neon Flex Controller
24V RGB Neon Flex™ Controller

Part Num: SRC-181-24V - V2.0

Controller for use with 24VDC RGB products. Configurable as standalone or DMX in/out. Controller offers precise RGB control. Unit can be 'daisy-channed' using
the built-in master slave option to provide static colour fades or mix programs.
RGB Neon Flex™ - 24V Controller
Additional RGB Neon Flex™ Plus Accessories
1m RGB Aluminium Channel
1m RGB Aluminium Channel
2m RGB Aluminium Channel
2m RGB Aluminium Channel
RGB Neon Flex™ 2M Aluminium Mounting Channel

Part Num: LN-FCB-4W-CH-2M

Neon Flex Aluminium mounting channel for RGB and 3528 Neon Flex in 2M lengths, can be cut down to desired lengths.
RGB Neon Flex™ - 240V Controller Set
240V RGB Neon Flex Controller
240V RGB Neon Flex Controller
240V RGB Neon Flex™ Controller

Part Num: SRC-181-240V - V2.0

Controller for use with 240VDC RGB products. Configurable as standalone or DMX in/out. Controller offers precise RGB control. Unit can be 'daisy-channed' using
the built-in master slave option to provide static colour fades or mix programs.
Fixture Protector
Fixture Protector
In line RGB Neon Flex™ 240V fixture protector

Overload protection unit which incorporates resetable fuses (automatic reset) supplied with the RGB 240 controllers to protect attached controller and lighting units from accidental damage due to overloading and shorts.

© 2014 - 2017 Neon Flex     |     All rights reserved                                                                                                                        www.neonflex.co.uk